Fuel Saver and Automobile Resource Links

• BioDiesel Made Easy


• HybridCars.com


• Automotive Troubleshooting Secrets

Fuel Saver and Automobile Articles

Home
Biodiesel A New Way of Turning Plants into Fuel
Biodiesel An Alternative Fuel Available Now
Biodiesel An Industry Poised for Growth
Biodiesel Facts For Kids
Biodiesel For Diesel Fuel Use
Biodiesel Keeps Home Fire Burning
Biodiesel Plan Spans Border
Biodiesel Refinery In Romania
Biofuel Cells To Replace Rechargeable Batteries
Biofuels As A Source Of Energy
Biofuels Fill Your Tank With Natures Goodness
Biofuels For Transport
Biological Ways Of Producing Ethanol
Cool Fuel Cells
Ethanol
Ethanol Based Biodiesel
Fill Er Up Full Of Beans
From Fuel To Pure Water
Fuel Alcohol From Pea Starch
Fuel Cell Benefits
Fuel Cell Cars
Fuel Cell Challenges
Fuel Cell Efficiency
Fuel Cell History
Fuel Cell Vehicle Benefits
Fuel Cell Vehicles General Information
Grass Hailed As Potential Source Of Clean Energy
How They Work Hydrogen Sources
Hybrid Electric And Fuel Cell Vehicles
Hydrogen Challenges
Hydrogen Delivery
Hydrogen Overview
Investigating The Greenness Of Biobased Products
Is There A Green Car in Your Future
Making Biodiesel Fuel at Home
RP To Mass Produce Sugar Sorghum For Bio Fuel
Running On Vegetables
Some Alcohol Fuels Facts
The Alcohols Ethanol And Methanol
Veggie Fuels Feed Bottom Line
What Is A Fuel Cell

Partners Page

Biodiesel For Diesel Fuel Use

Bio-diesel For Diesel Fuel Use

Production of Bio-diesel

You will need:

* Used or fresh vegetable oil (strained with a coffee filter or cloth)

* Red Devil Lye

* Methanol (dry gas methanol found at automotive racing stores)

* Isopropyl Alcohol (For tests. Use 99% IPA.)

* Eyedropper (or other type of 1 milliliter dropper)

* PH paper (available at drug stores) to test foracidity

* An old blender

* Plastic or glass measuring cups or beakers with metric measures and/or a gram scale

* Plastic, glass, or stainless stirrers and spoons

* Plastic buckets

* Rubber gloves

* Safety glasses

* Plastic apron

Titration Process to determine how much Lye to use

Free fatty acids will increase with the amount of time vegetable oil has been heated. Oil which has been used for cooking will require more of the reactive agents (lye and methanol) than fresh oil. The presence of too many free fatty acids will retard or stop the reaction which produces biodiesel, so it is necessary to detect the exact amount of LYE (Sodium Hydroxide-- or NaOH) needed to neutralize the acids. Adding too much or too little NaOH will just make excessive amounts of bi-product (soap).

1. Dissolve 1 gram NaOH (Sodium Hydroxide- Red Devil Lye) in 1000 ml. of water. This is your NaOH solution.

2. Dissolve 1ml. of Wasted Vegetable Oil (WVO) in 10 ml. Isopropyl Alcohol(IPA). This is your WVO solution.

3. With an eyedropper, drop the diluted NaOH into WVO mixture a milliliter at a time. Count the drops. After each ml drop check the ph level of the WVO solution with standard ph paper, you will see an eventual rise in the ph level.

4. Continue to add the NaOH solution into the WVO solution, a drop at a time, until it reaches a ph of 8-9.

To determine your proportions, figure:

The number of drops of NaOH needed for the WVO solution to reach a ph of 8-9 1 ml. plus 3.5 g. NaOH to catalyze the oil.

An example formula used with one particular batch of WVO-wasted vegetable oil:

1 ml of oil was titrated with a 1g NaOH/1000 ml H2O solution. It required 6.0 ml to raise the ph level to 8 = .006g

So... 6.0g/1000ml to neutralize the free fatty acids

Plus... 3.5 g NaOH as catalyst

= ... 9.5 g per 1000ml oil or 9.5g/915g oil=103% by wt.

Vegetable Oil: Transesterification For Wasted Vegetable Oil (WVO)

Diesel has a chain of 11-13 carbons, and new vegetable oil has a chain of about 18, but wasted vegetable oil, which has been heated has chains of up to 32 carbons. To burn in an engine the chain needs to be broken down to be similar in length to diesel.

Lye (Sodium Hydroxide (NaOH) or potassium hydroxide also works):

The catalyst for transesterification. It works by "cracking" the vegetable oil molecules, splitting the triglycerides from the hydrocarbons and shortening the carbon chain. (3.5g or .35% is the standard amount of lye necessary to create a reaction, when using fresh vegetable oil, so you can figure that used vegetable oil will always use more).

Methanol:

The amount of methanol needed will also vary, but the ideal is to use the least amount of methanol necessary in order to get the highest yield. The yield is related to completion; so if you get a 90% yield that means that 90% of the fatty acids have been eliminated from the vegetable oil. We have found that the best is to use 15% to 20% methanol, based upon the total weight of your batch of oil. *It is best to use dry gas methanol (we found methanol at an automotive racing store).

A hydrometer can also be used to check the amount of completion according to density.

* Vegetable Oil has a specific density of .910

* Biodiesel has a specific density of .850-.870

Recipe for Colorado Gold example test, using WVO we got in Colorado:

1. Weigh 4kg of WVO heated in a stock pot on a hot plate up to 120 degrees.

2. In separate container, mix-15% of 4Kg=600g Methanol (MeOH) (or 17.2% by volume=750ml) with- 3.40g (1%) of NaOH until the NaOH dissolves. Add the NaOH slowly! It will become extremely hot, and on a larger scale potentially dangerous. This combined mixture makes Sodium Methoxide.

3. Add this to the WVO and mix for 40-60 minutes. We used a dry wall mixer bit attached to a 1/2 foot drill to do the mixing.

4. NOW draw out samples every 5-10 minutes to check the rate of separation. The cloudy looking free fatty acids, called glycerine, will sink to the bottom and the methyl esters--a translucent liquid, will remain on top.

5. When the separation appears not to be advancing any more, stop mixing.

6. Let the mixture settle for at least 8 hours.

7. The liquid you have on top now is methyl ester, but before using it you have to remove any remaining soaps or salts which could cause engine damage.

8. The glycerin which has sunk to the bottom should be disposed at your local toxic waste disposal site.

Rinsing Methyl Ester:

1. Pour off the methyl ester into a separate clean container, so it can be washed free of any remaining soaps, salts or free fatty acids.

2. Add water to the methyl ester. Stir slightly and then allow mix to settle.

3. When the water has cleanly separated from the methyl esters, drain or pump the water out from the bottom.

4. Repeat until the discarded rinse water reaches ph level of 6-7 -- and no soap bubbles appear.

If the liquid is cloudy, there is water being retained in the fuel, and it will need to be reheated slowly to evaporate out the water. Any white substances forming at the bottom or any bubbles forming at the surface is a sign of soaps and should be removed or the liquid should be re-washed. The cleaned methyl esters are now a homemade version of biodiesel and are ready to go into your diesel tank.

ONE MORE WARNING:

To use 100% Biodiesel for longer than 4 weeks straight will cause complications to any rubber components of the engine that the fuel might come into contact with-fuel pump, hoses, o-rings, etc. These can either be replaced with steel or heavy duty rubber or.. it is recommended to use a percentage of diesel with your homemade fuel- at least 20%.